O86-14 engineering design in wood pdf

O86-14 engineering design in wood pdf
CAN/CSA-O86-14 – Engineering Design in Wood 2.3. ASTM A153 – Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware 2.4. ASTM D1761 – Standard Test Methods for Mechanical Fasteners in Wood 2.5. ASTM F1575 – Standard Test Method for Determining Bending Yield Moment of Nails 2.6. ASTM F606 – Standard Test Method for Determining Properties of Fasteners 3
CSA O86 – 14 Engineering design in wood. CSA: This Standard provides criteria for the structural design and appraisal of structures or structural elements made from wood or wood products, including graded lumber, glued-laminated timber, cross-laminated timber (CLT), unsanded plywood,…
The limit states design version of the 1989 Canadian code for engineering design in wood (CSA-086.1-M89) is, for the most part, reliability-based.
CSA O86-2014 O86-14 – Engineering design in wood. Preface This is the tenth edition of CSA O86, Engineering design in wood. It is presented in limit states design (LSD) format, and supersedes the previous editions published in 2009, 2001, 1994, 1989, 1984, …
Description:Specifies criteria for the structural design and appraisal of structures or structural elements made from wood or wood products, including graded lumber, glued-laminated timber, unsanded plywood, oriented strandboard (OSB), composite building components, shearwalls and diaphragms, timber piling, pole-type construction, prefabricated
Designed using WoodWorks® Sizer according to the National Building Code 2015 Part 4 and the CSA O86-14 Standard – Engineering design in wood. Design must be verified by a qualified engineer. Please refer to the
included in the latest revision of the Canadian Standards Association (CSA) O86-Engineering design in wood [20]. The CLT panels themselves behave almost rigidly, and the hysteresis is developed
O86‐14: Updates to O86 Engineering Design in Wood. Special focus on CLT andnectioncon design aspects. Special focus on CLT andnectioncon design aspects. S304‐14: Updates to S304 Design of Masonry Structures .
The CWC would like to thank the individuals who were instrumental in the original development of this manual: Stephen J. Boyd, Quaile Engineering Ltd., and Gary C. Williams, Timber Systems Ltd. Michael Giroux President May 2016 The information in the Wood Design Manual is based on the latest information available from the National Building Code of Canada (2015) and from CSA Standard O86-14
Publication: Engineering Guide for Wood Frame •CSA O86‐14 Permanent Wood Foundations 2016 •Now permitted for use in high wind and seismic zones •Now permitted for use in all Part 9 buildings (up to 3‐storeys above grade) Courtesy of Spray Lakes Sawmill. Toronto Wood Solutions Fair 2015 CWC Tools & Publications Kevin Rocchi & Adam Robertson 19 Permanent Wood Foundations 2016
ontario . provincial : standard . specification . metric . opss 907 . april 2011 . construction specification for . structural wood systems . table of contents
UNB2 Design Method for Connections in Engineered Wood Structures Page iii of 80 proposal’ will be submitted to the committee during 2006 with the expectation that changes will be fully completed within the code revision cycle that will end in 2008.
Canadian Wood Council Webstore
https://www.youtube.com/embed/BF782Fz95O0

CONSTRUCTION SPECIFICATION FOR STRUCTURAL WOOD
The product conforms to CSA S347-14, “Method of test for evaluation of truss plates used in lumber joints,” and CSA O86-14, “Engineering Design in Wood.” CSA …
Specifies criteria for the structural design and appraisal of structures or structural elements made from wood or wood products, including graded lumber, glued-laminated timber, cross-laminated timber (CLT), unsanded plywood, oriented strandboard (OSB), composite building components, shearwalls and diaphragms, timber piling, pole-type construction, prefabricated wood I-joists, structural
The Guide may be used with proprietary wood products that are manufactured in accordance with a quality assurance program supervised by an independent third-party certification organization with design values developed in accordance with Clauses 13 and 14 of CSA Standard O86 and are designed and installed in accordance with the manufacturer’s material evaluation report. laminated veneer
B. CSA O86-14, Engineering Design in Wood, including Annex B. C. CSA O112 SERIES-M1977 (R2006), CSA Standards for Wood Adhesives. D. CSA O177-16, Qualification Code for Manufacturers of Structural Glued Laminated
Preface This is the tenth edition of CSA O86, Engineering design in wood. It is presented in limit states design (LSD) format, and supersedes the previous editions published in 2009, 2001, 1994, 1989, 1984, 1980, 1976, 1970, and 1959, including their Supplements.
CSA O86-01-2001 engineering design in wood eighth edition update no 1 CSA O86.1-1994 Engineering Design In Wood (limit States Design) CSA A370-14 …
SEABC Seminar: 2014/2015 Updates to NBCC and CSA Structural Design Standards January 16 2015 . 3 . Overview of CSA O86-2014 Changes • Published in July 2014 (PDF format)

At the same time, the Canadian Standards Association (CSA) O86-09, Engineering Design in Wood, provides rational mechanics-based analysis methods for engineered design. Both of these resources rely on CSA B111, Wire Nails, Spikes, and Staples , as the reference specification for small-diameter driven fasteners.
-Unlimited PDF access on any internet browser connected device (desktop,laptop,tablet,mobile phone). Once license can be shared among many users.
The engineer must design in accordance with CSA O86, and may use as a guide the “Engineering Guide for Wood Frame Construction,” published by the Canadian Wood Council. The specified strengths for the product must not exceed the values set forth in Table 4.1.1.
seismic loads according to the NBC 2010 and design wood-frame shearwalls according to CSA O86-09 or -14. Deflection of shearwalls and force distribution based on flexible and rigid diaphragm
CSA S406-2016 S406-16 – Specification of permanent wood foundations for housing and small buildings. Preface This is the third edition of CSA S406, Specification of permanent wood foundations for housing and small buildings.
The fire safety design for a CLT building larger than the prescriptive limit must demonstrate that the building will achieve at least the minimum level of performance afforded by noncombustible construction in limiting the structural involvement in fire and contribution to the growth and spread of fire during the time required for occupant evacuation and emergency responses.
hapter 3 of The Wood Handbook, Wood as an Engineering
This is a list of spreadsheets that allow the calculation of strengths and resistances for different wood elements and connections according to the Canadian structural wood design standard: CSA O86-09: Engineering Design in Wood.

Tall Walls Workbook 1 1. Introduction This Workbook is intended to assist in using wood for the design of tall walls in commercial and indus-trial structures and to provide a step-by-step guide
Mechanical engineers plan, design and oversee the development, installation, operation and maintenance of machinery. They conduct research to solve practical engineering …
RE: Wood Design Kh factor in CSA Standard O86 jayrod12 (Structural) 13 May 14 12:40 Case 1 is when you have typical members at a consistent spacing to allow for …
The resulting design for wood foundation studs is consistent with design of other wood systems in the Standard. Other changes to wood foundation design are given in Appendix A.6.5.12.6: squared term in the interaction formula, and specific guidance in the footnote regarding application of …
The program now implements the new CSA O86-14 Engineering Design in Wood Standard. As the National As the National Building Code referencing CSA O86-14 is not yet released, and provincial building codes have not yet
Canadian Wood Council Webstore Product Categories Software (2) Technical Books (19) Wood Design & Building Magazine (1) Wood Design Awards Books (7) NOTE: Our Shipping Department will be closed during Holiday period.
https://www.youtube.com/embed/BF782Fz95O0
Commentary on CSA O86 “Engineering Design in Wood” 2014
These will only be visible when you have selected the CSA O86-09: Ultimate or CSA O86-14: Ultimate as your wood design code in Model Settings. Reference equations are reported in the member detail report for the calculation of each capacity value.
CSA-O86 Engineering design in wood This document comes with our free Notification Service, good for the life of the document.
CSA O86-14 Engineering Design in Wood ASTM D5456-13a recognized by CAN/CSA O86-14 APA Reports T97P-26, T98P-10, T2000P-24, T2002P-12, T2002P-15, T2003P-46,
The information in the Wood Design Manual is based on the latest information available from the National Building Code of Canada (2015) and from CSA Standard O86-14 Engineering Design in
Technical Resources for Engineering Design for Mid-Rise Design provisions in O86-14 (Clause 12.6.5) • Based on the density of various wood products • Apply not only to lag screws but also self-drilling fasteners compliant to appropriate product standards or product evaluation reports . 05/12/2014 15 Overview of CSA O86-2014 Changes Published in July 2014 (PDF format) Mid-rise related
S406-14 – Specification of permanent wood foundations for housing and small buildings Formats Available: Online PDF, Print -Unlimited PDF access on any internet browser connected device (desktop,laptop,tablet,mobile phone).subaru liberty 2015 starlink manual pdftion Sheathing OSB in the Engineering Design in Wood standard, CSA O86-01. SBA committed its technical resources and engaged the services of Quaile Engineering Ltd. (in particular Stephen J. Boyd, P.Eng.), and Ketchen Industrial Design.
The scope of CSA Standard O86, “Engineering Design in Wood,” covers structural design and appraisal of structures and structural elements made from wood or wood products.
Supplement #1 to CAN/CSA-O86-01, Engineering Design in Wood. Amendment by CSA Group, 01/01/2005. This document is an amendment. View the base document. View all product details Most Recent Track It. Language: Available Formats Availability; Priced From ( in USD ) Secure PDF ℹ. Secure PDF Files. Secure PDF files include digital rights management (DRM) software. DRM is included at …
Note: An updated version of this publication, released in 2010, is available at Wood Handbook, 2010 (PDF, 15 MB) Forest Products Laboratory. 1999. Wood handbook–Wood as an engineering material.
d) LP SolidStart LSL and LVL stud-braced walls shall be detailed in accordance with Clause 9.23.13 of the 2010 NBC and Section 4.3 of this report. 3.2.2 Part 4 Stud Wall Applications: LP SolidStart LVL having a grade of 1.5E or greater, and
Commentary on CSA O86, “Engineering Design in Wood” 2014 Edition Cl. 1-3 Scope, Reference Publications, Definitions, Symbols, Dimensions
The Fire Engineering Brief (FEB) is a process that defines the scope of work for the fire engineering analysis and allows for stakeholder consultation culminating in a document that provides general details of the proposed design, methods of analysis and design actions (fire
CSA O86-2014 O86-14 – Engineering design in wood
CSA O86-14 (reprint 2016) Engineering Design in Wood CSA O122-16 Structural Glued Laminated Timber CSA O177-06 (R2015) Qualification Code for Manufacturers of Structural Glued-
This Standard provides criteria for the structural design and appraisal of structures or structural elements made from wood or wood products, including graded lumber, glued-laminated timber, cross-laminated timber (CLT), unsanded plywood, oriented strandboard (OSB), composite building components, shearwalls and diaphragms, timber piling, pole
appreciate the natural characteristics of wood and their effect on the engineering properties of lumber. A brief discussion of the properties of lumber and structural wood panels follows. Residential Structural Design Guide 5-3 . Chapter 5 – Design of Wood Framing 5.2.1 Lumber General As with all materials, the designer must consider wood’s strengths and weaknesses. A comprehensive source of
Applying Forensic Investigations of Failures of Structural Performance. Jonathan G M Wood Structural Studies & Design Ltd. Chiddingfold, GU8 4UU UK Contact:onathan@ss-design.demon.co.uk j Abstract Information from rigorous investigations of construction performance failures can be applied to reduce risks and improve construction standards for practicing engineers, within design and …
• ASD/LRFD Structural Wood Design Solved Ex-ample Problems, 2012 Edition. The American Wood Council (AWC) has developed this manual for design professionals. AWC and its prede – cessor organizations have provided engineering design information to users of structural wood products for over 75 years, first in the form of the Wood Structural Design Data series and then in the National Design
Cross Laminated Timber (CLT) Specifications Structurlam

CSA O86-14 Commentary.pdf PDF Free Download

The Guide may be used with proprietary wood products that are manufactured in accordance with a quality assurance program supervised by an independent third-party certification organization with design values developed in accordance with Clauses 13 and 14 of CSA Standard O86 and are designed and installed in accordance with the manufacturer’s material evaluation report. . In the Design
CSA O86 -14 Engineering Design in Wood AC257 Compliant Bronze Star ACQ Compatible #9 x 3” (76 mm) “Star Drive” Screws ICC -ES / ESR-2442 – RSS Structural Screws ASTM A-153 – Galvanized Nails Compatible with Pressure Treated Products DELIVERY, STORAGE, AND HANDLING Product may be stored outside, but should be protected from deformation and other damage during delivery, storage, …
O86-14. May 1, 2009 Engineering design in wood This Standard provides criteria for the structural design and appraisal of structures or structural elements made from wood or wood products, including graded lumber, glued-laminated timber, unsanded… O86S1-01. January 1, 2005 Engineering Design in Wood A description is not available for this item. O86-01 UPD 1. January 1, 2003 Engineering
The “MT20” truss plate conforms to CSA S347-14, “Evaluation of truss plates used in lumber joints,” and to CSA O86-14, “Engineering design in wood.” Results from testing the product in conformance with CSA S347 are shown in the following tables.
CSA O86 2009 ENGINEERING DESIGN IN WOOD SAI Global

CSA O86-14-2014 Engineering design in wood Tenth Edition

Evaluation Listing CCMC 11996-L MT20

Wood and Fiber Science wfs.swst.org

Overview of Changes to CSA O86-2014 Structural Design
what is digital literacy pdf 2014/2015 Updates to NBCC and CSA Structural Design Standards
CSA O86 2014 ENGINEERING DESIGN IN WOOD SAI Global

CSA O86 14 Engineering design in wood – Power
https://www.youtube.com/embed/BF782Fz95O0

Evaluation Report CCMC 08675R Microllam LVL

CSA O86-2014 Engineering Design In Wood Freestd
Engineering Guide Woodfram PDF Framing (Construction

The Fire Engineering Brief (FEB) is a process that defines the scope of work for the fire engineering analysis and allows for stakeholder consultation culminating in a document that provides general details of the proposed design, methods of analysis and design actions (fire
The resulting design for wood foundation studs is consistent with design of other wood systems in the Standard. Other changes to wood foundation design are given in Appendix A.6.5.12.6: squared term in the interaction formula, and specific guidance in the footnote regarding application of …
CSA O86-01-2001 engineering design in wood eighth edition update no 1 CSA O86.1-1994 Engineering Design In Wood (limit States Design) CSA A370-14 …
The fire safety design for a CLT building larger than the prescriptive limit must demonstrate that the building will achieve at least the minimum level of performance afforded by noncombustible construction in limiting the structural involvement in fire and contribution to the growth and spread of fire during the time required for occupant evacuation and emergency responses.
These will only be visible when you have selected the CSA O86-09: Ultimate or CSA O86-14: Ultimate as your wood design code in Model Settings. Reference equations are reported in the member detail report for the calculation of each capacity value.
CSA O86-14 Engineering Design in Wood ASTM D5456-13a recognized by CAN/CSA O86-14 APA Reports T97P-26, T98P-10, T2000P-24, T2002P-12, T2002P-15, T2003P-46,
Designed using WoodWorks® Sizer according to the National Building Code 2015 Part 4 and the CSA O86-14 Standard – Engineering design in wood. Design must be verified by a qualified engineer. Please refer to the
Publication: Engineering Guide for Wood Frame •CSA O86‐14 Permanent Wood Foundations 2016 •Now permitted for use in high wind and seismic zones •Now permitted for use in all Part 9 buildings (up to 3‐storeys above grade) Courtesy of Spray Lakes Sawmill. Toronto Wood Solutions Fair 2015 CWC Tools & Publications Kevin Rocchi & Adam Robertson 19 Permanent Wood Foundations 2016
appreciate the natural characteristics of wood and their effect on the engineering properties of lumber. A brief discussion of the properties of lumber and structural wood panels follows. Residential Structural Design Guide 5-3 . Chapter 5 – Design of Wood Framing 5.2.1 Lumber General As with all materials, the designer must consider wood’s strengths and weaknesses. A comprehensive source of
This Standard provides criteria for the structural design and appraisal of structures or structural elements made from wood or wood products, including graded lumber, glued-laminated timber, cross-laminated timber (CLT), unsanded plywood, oriented strandboard (OSB), composite building components, shearwalls and diaphragms, timber piling, pole
O86-14. May 1, 2009 Engineering design in wood This Standard provides criteria for the structural design and appraisal of structures or structural elements made from wood or wood products, including graded lumber, glued-laminated timber, unsanded… O86S1-01. January 1, 2005 Engineering Design in Wood A description is not available for this item. O86-01 UPD 1. January 1, 2003 Engineering
The program now implements the new CSA O86-14 Engineering Design in Wood Standard. As the National As the National Building Code referencing CSA O86-14 is not yet released, and provincial building codes have not yet

Mass Timber Rocking Panel Retrofit of a Four-Story Soft
Wood Handbook- Wood as an Engineering Material

Technical Resources for Engineering Design for Mid-Rise Design provisions in O86-14 (Clause 12.6.5) • Based on the density of various wood products • Apply not only to lag screws but also self-drilling fasteners compliant to appropriate product standards or product evaluation reports . 05/12/2014 15 Overview of CSA O86-2014 Changes Published in July 2014 (PDF format) Mid-rise related
CSA O86-14 (reprint 2016) Engineering Design in Wood CSA O122-16 Structural Glued Laminated Timber CSA O177-06 (R2015) Qualification Code for Manufacturers of Structural Glued-
Commentary on CSA O86, “Engineering Design in Wood” 2014 Edition Cl. 1-3 Scope, Reference Publications, Definitions, Symbols, Dimensions
seismic loads according to the NBC 2010 and design wood-frame shearwalls according to CSA O86-09 or -14. Deflection of shearwalls and force distribution based on flexible and rigid diaphragm

Wood and Fiber Science wfs.swst.org
Evaluation Listing CCMC 11996-L MT20

The CWC would like to thank the individuals who were instrumental in the original development of this manual: Stephen J. Boyd, Quaile Engineering Ltd., and Gary C. Williams, Timber Systems Ltd. Michael Giroux President May 2016 The information in the Wood Design Manual is based on the latest information available from the National Building Code of Canada (2015) and from CSA Standard O86-14
CSA O86-01-2001 engineering design in wood eighth edition update no 1 CSA O86.1-1994 Engineering Design In Wood (limit States Design) CSA A370-14 …
included in the latest revision of the Canadian Standards Association (CSA) O86-Engineering design in wood [20]. The CLT panels themselves behave almost rigidly, and the hysteresis is developed
The scope of CSA Standard O86, “Engineering Design in Wood,” covers structural design and appraisal of structures and structural elements made from wood or wood products.
Preface This is the tenth edition of CSA O86, Engineering design in wood. It is presented in limit states design (LSD) format, and supersedes the previous editions published in 2009, 2001, 1994, 1989, 1984, 1980, 1976, 1970, and 1959, including their Supplements.

Copyright Materials
Commentary on CSA O86 “Engineering Design in Wood” 2014

included in the latest revision of the Canadian Standards Association (CSA) O86-Engineering design in wood [20]. The CLT panels themselves behave almost rigidly, and the hysteresis is developed
ontario . provincial : standard . specification . metric . opss 907 . april 2011 . construction specification for . structural wood systems . table of contents
CSA S406-2016 S406-16 – Specification of permanent wood foundations for housing and small buildings. Preface This is the third edition of CSA S406, Specification of permanent wood foundations for housing and small buildings.
At the same time, the Canadian Standards Association (CSA) O86-09, Engineering Design in Wood, provides rational mechanics-based analysis methods for engineered design. Both of these resources rely on CSA B111, Wire Nails, Spikes, and Staples , as the reference specification for small-diameter driven fasteners.
CSA O86-14 (reprint 2016) Engineering Design in Wood CSA O122-16 Structural Glued Laminated Timber CSA O177-06 (R2015) Qualification Code for Manufacturers of Structural Glued-
RE: Wood Design Kh factor in CSA Standard O86 jayrod12 (Structural) 13 May 14 12:40 Case 1 is when you have typical members at a consistent spacing to allow for …
Technical Resources for Engineering Design for Mid-Rise Design provisions in O86-14 (Clause 12.6.5) • Based on the density of various wood products • Apply not only to lag screws but also self-drilling fasteners compliant to appropriate product standards or product evaluation reports . 05/12/2014 15 Overview of CSA O86-2014 Changes Published in July 2014 (PDF format) Mid-rise related
Preface This is the tenth edition of CSA O86, Engineering design in wood. It is presented in limit states design (LSD) format, and supersedes the previous editions published in 2009, 2001, 1994, 1989, 1984, 1980, 1976, 1970, and 1959, including their Supplements.
The engineer must design in accordance with CSA O86, and may use as a guide the “Engineering Guide for Wood Frame Construction,” published by the Canadian Wood Council. The specified strengths for the product must not exceed the values set forth in Table 4.1.1.
CSA O86-01-2001 engineering design in wood eighth edition update no 1 CSA O86.1-1994 Engineering Design In Wood (limit States Design) CSA A370-14 …
B. CSA O86-14, Engineering Design in Wood, including Annex B. C. CSA O112 SERIES-M1977 (R2006), CSA Standards for Wood Adhesives. D. CSA O177-16, Qualification Code for Manufacturers of Structural Glued Laminated
seismic loads according to the NBC 2010 and design wood-frame shearwalls according to CSA O86-09 or -14. Deflection of shearwalls and force distribution based on flexible and rigid diaphragm
The program now implements the new CSA O86-14 Engineering Design in Wood Standard. As the National As the National Building Code referencing CSA O86-14 is not yet released, and provincial building codes have not yet
The information in the Wood Design Manual is based on the latest information available from the National Building Code of Canada (2015) and from CSA Standard O86-14 Engineering Design in
The scope of CSA Standard O86, “Engineering Design in Wood,” covers structural design and appraisal of structures and structural elements made from wood or wood products.

Structural Engineer’s Timber Forest and Wood Products
Copyright Materials

The fire safety design for a CLT building larger than the prescriptive limit must demonstrate that the building will achieve at least the minimum level of performance afforded by noncombustible construction in limiting the structural involvement in fire and contribution to the growth and spread of fire during the time required for occupant evacuation and emergency responses.
CSA S406-2016 S406-16 – Specification of permanent wood foundations for housing and small buildings. Preface This is the third edition of CSA S406, Specification of permanent wood foundations for housing and small buildings.
CSA O86-2014 O86-14 – Engineering design in wood. Preface This is the tenth edition of CSA O86, Engineering design in wood. It is presented in limit states design (LSD) format, and supersedes the previous editions published in 2009, 2001, 1994, 1989, 1984, …
The “MT20” truss plate conforms to CSA S347-14, “Evaluation of truss plates used in lumber joints,” and to CSA O86-14, “Engineering design in wood.” Results from testing the product in conformance with CSA S347 are shown in the following tables.
The Guide may be used with proprietary wood products that are manufactured in accordance with a quality assurance program supervised by an independent third-party certification organization with design values developed in accordance with Clauses 13 and 14 of CSA Standard O86 and are designed and installed in accordance with the manufacturer’s material evaluation report. laminated veneer
The Guide may be used with proprietary wood products that are manufactured in accordance with a quality assurance program supervised by an independent third-party certification organization with design values developed in accordance with Clauses 13 and 14 of CSA Standard O86 and are designed and installed in accordance with the manufacturer’s material evaluation report. . In the Design
-Unlimited PDF access on any internet browser connected device (desktop,laptop,tablet,mobile phone). Once license can be shared among many users.
RE: Wood Design Kh factor in CSA Standard O86 jayrod12 (Structural) 13 May 14 12:40 Case 1 is when you have typical members at a consistent spacing to allow for …
CSA O86-14 (reprint 2016) Engineering Design in Wood CSA O122-16 Structural Glued Laminated Timber CSA O177-06 (R2015) Qualification Code for Manufacturers of Structural Glued-
O86‐14: Updates to O86 Engineering Design in Wood. Special focus on CLT andnectioncon design aspects. Special focus on CLT andnectioncon design aspects. S304‐14: Updates to S304 Design of Masonry Structures .

CSA O86-14 Techstreet -Technical Information Superstore
Wood Design – RISA – Structural Engineering Software for

Designed using WoodWorks® Sizer according to the National Building Code 2015 Part 4 and the CSA O86-14 Standard – Engineering design in wood. Design must be verified by a qualified engineer. Please refer to the
CSA O86-14 Engineering Design in Wood ASTM D5456-13a recognized by CAN/CSA O86-14 APA Reports T97P-26, T98P-10, T2000P-24, T2002P-12, T2002P-15, T2003P-46,
The product conforms to CSA S347-14, “Method of test for evaluation of truss plates used in lumber joints,” and CSA O86-14, “Engineering Design in Wood.” CSA …
Note: An updated version of this publication, released in 2010, is available at Wood Handbook, 2010 (PDF, 15 MB) Forest Products Laboratory. 1999. Wood handbook–Wood as an engineering material.
The information in the Wood Design Manual is based on the latest information available from the National Building Code of Canada (2015) and from CSA Standard O86-14 Engineering Design in
seismic loads according to the NBC 2010 and design wood-frame shearwalls according to CSA O86-09 or -14. Deflection of shearwalls and force distribution based on flexible and rigid diaphragm
The scope of CSA Standard O86, “Engineering Design in Wood,” covers structural design and appraisal of structures and structural elements made from wood or wood products.

CSA O86 Engineering design in wood Engineering360
Evaluation Report CCMC 08675R Microllam LVL

d) LP SolidStart LSL and LVL stud-braced walls shall be detailed in accordance with Clause 9.23.13 of the 2010 NBC and Section 4.3 of this report. 3.2.2 Part 4 Stud Wall Applications: LP SolidStart LVL having a grade of 1.5E or greater, and
Commentary on CSA O86, “Engineering Design in Wood” 2014 Edition Cl. 1-3 Scope, Reference Publications, Definitions, Symbols, Dimensions
The resulting design for wood foundation studs is consistent with design of other wood systems in the Standard. Other changes to wood foundation design are given in Appendix A.6.5.12.6: squared term in the interaction formula, and specific guidance in the footnote regarding application of …
CSA S406-2016 S406-16 – Specification of permanent wood foundations for housing and small buildings. Preface This is the third edition of CSA S406, Specification of permanent wood foundations for housing and small buildings.
The Fire Engineering Brief (FEB) is a process that defines the scope of work for the fire engineering analysis and allows for stakeholder consultation culminating in a document that provides general details of the proposed design, methods of analysis and design actions (fire
seismic loads according to the NBC 2010 and design wood-frame shearwalls according to CSA O86-09 or -14. Deflection of shearwalls and force distribution based on flexible and rigid diaphragm
The information in the Wood Design Manual is based on the latest information available from the National Building Code of Canada (2015) and from CSA Standard O86-14 Engineering Design in
CSA O86-14 (reprint 2016) Engineering Design in Wood CSA O122-16 Structural Glued Laminated Timber CSA O177-06 (R2015) Qualification Code for Manufacturers of Structural Glued-
CSA O86-2014 O86-14 – Engineering design in wood. Preface This is the tenth edition of CSA O86, Engineering design in wood. It is presented in limit states design (LSD) format, and supersedes the previous editions published in 2009, 2001, 1994, 1989, 1984, …
CSA O86 – 14 Engineering design in wood. CSA: This Standard provides criteria for the structural design and appraisal of structures or structural elements made from wood or wood products, including graded lumber, glued-laminated timber, cross-laminated timber (CLT), unsanded plywood,…
CSA O86-14 Engineering Design in Wood ASTM D5456-13a recognized by CAN/CSA O86-14 APA Reports T97P-26, T98P-10, T2000P-24, T2002P-12, T2002P-15, T2003P-46,
These will only be visible when you have selected the CSA O86-09: Ultimate or CSA O86-14: Ultimate as your wood design code in Model Settings. Reference equations are reported in the member detail report for the calculation of each capacity value.